Republic’s Storage Cabinets are ideal for office or back room storage of employee belongings, supplies and stationery. Cabinet doors open to a full 180 degrees for complete, easy access. The counter high units permit full room visibility and provide excellent counter height work surface.
Cabinet doors open 180 degrees for complete, easy access.
A pan-type door reinforcement adds strength while a three-point locking system provides security.
Storage cabinets are available with shelves. Full height cabinets have four adjustable shelves; counter high cabinets have two shelves. Extra shelves may be purchased separately for either unit.
Wardrobe cabinets include one upper shelf and a coat rod. Wardrobe cabinets may be modified for half-shelf storage with a combination interior kit, which includes a partition and four half-width shelves.
SIZES AND STYLES AVAILABLE
Double Door Storage Cabinet - 36” wide X 18” deep X 78” high
Double Door Storage Cabinet - 36” wide X 25-1/4” deep X 78” high
Counter High Storage Cabinet - 36” wide X 18” deep X 42” high
Counter High Storage Cabinet - 36” wide X 25-1/4” deep X 42” high
Double Door Wardrobe Cabinet - 36” wide X 18” deep X 78” high
Double Door Wardrobe Cabinet - 36” wide X 25-1/4” deep X 78” high
Storage Cabinets are shipped knocked down and assembled using nuts and bolts.
All parts are cleaned and phosphatized followed by a baked on enamel finish. Standard colors available are L-50 Gray and L-83 Tan. Other colors may be available. Please contact our Canton, OH office for special pricing.
GAGE OF COMPONENTS
Left or Right Hand Upright 24 gage Back 24 gage
Adjusting Strip 18 gage Top 24 gage
Partition 24 gage Shelf 20 gage
Lock Bar 12 gage Bottom 20 gage
Counter Top 20 gage Frame 16 gage
Door Reinforcing Pan 24 gage Door 20 gage
Door Hinge 5 Knuckle Full Loop 18 gage
SHELF LOAD CAPACITY
Nominal 36” wide shelf - 275 pounds uniformly distributed load maximum.
Nominal 18” wide half shelf - 150 pounds uniformly distributed load maximum.
HANDLE & LOCK
Handle to be zinc die cast, chrome satin finish. Handle to have a built in lock and furnished with two grooved keys. Locking handle to operate a three-point latch mechanism. Locks may be keyed alike or keyed different. Please specify your requirement.
All components necessary to assemble one storage cabinet are shipped complete in one carton.
1. Combination Kit – Used to convert a wardrobe cabinet to half storage shelves and half wardrobe storage.
2. Extra Shelves.
3. Latch and Lockbar Replacement Kit.
4. Master Key.
Storage Cabinet Specifications
Republic Storage Systems Company
In general, all steel is AISI 1010 commercial quality, cold-rolled, carbon steel and meets ASTM Specification A-366. Gauges of material are US Manufacturer’s standard.
All parts shall be cleaned and phosphatized in a seven step process. The parts will then be given a coat of baking enamel which is baked on at 300 degrees for 30 minutes. See specification on preparation and painting for a detailed explanation of preparation and performance.
Cabinet – bolted construction with door frame welded into an integral unit.
Door side frames – 16 gauge steel formed into a channel section with rear edge offset and punched for bolting of shelves.
Bottom frame – 16 gauge steel formed into a channel section and spot welded to side frames.
Top frame – 16 gauge steel formed into a channel section with lower edge offset to form door strike and spot welded to side members.
Sides – 24 guage steel flanged on all four edges and bolted to door frame, top, bottom and back.
Back – 24 gauge steel flanged at bottom and bolted to sides, top and bottom. Rear adjusting strips 18 gauge steel formed into a flanged V section and bolted to back near rear side edges. V section slotted to receive rear edge of shelf.
Top – 24 gauge steel flanged at rear edge and bolted to door frame, sides and back.
Bottom – 20 gauge steel flanged on sides and back, and front edge formed into a channel section to act as a door strike. Bottom bolts to side and back.
Shelf – 20 gauge steel flanged on ends, with front and rear edges formed into a channel section for strength and finish. Shelf adjustment on 2” centers provided by bolting to side frames at front and by engaging slots in adjusting strips at rear.
Doors – 20 gauge steel with 24 gauge steel reinforcement formed into a pan section and spot welded to inside of door.
Left hand door – flanged at top and bottom, and left hand edge formed into a channel section. Right hand edge formed into a Z section with edge folded with acts as strike for right hand door.
Right hand door – flanged at top and bottom. Side edges formed into a channel section.
Hinges – five knuckle, full loop, tight pin type spot welded to side frames and bolted to door.
Handle – lever type, zinc die cast, chrome plated.
Lock – grooved key, built-in handle type, controlling a three point locking mechanism operated by lever type handle. Top and bottom of door have non-metallic shelf lubricating lockbar guides. Tow keys per lock, keyed differently and masterkeyed.
The maximum capacity of a storage cabinet is 1200 pounds. The 36” wide x 18” deep shelf has a capacity of 275 pounds uniformly distributed on the shelf. The 36” wide x 25-1/4” deep shelf has a capacity of 225 pounds, uniformly distributed on the shelf.
Due to variances in monitor settings and color calibration, color representations shown may vary from actual painted product. Color sample plates may be obtained from your Republic Representative.
Adobe Acrobat Reader is required to view PDF files. If you do not have this application installed, please click here to download it free of charge from Adobe.
Microsoft Word or Microsoft Word Viewer is required to view .DOC files. If you do not have one of these applications installed, please click here to download Microsoft Word Viewer free of charge from Microsoft.